Skip to main content

San Fernando Valley Whole-Home Remodeling.

A whole-home remodel in LA is usually a down-to-studs project on a 1920s–1960s house. The shell stays; everything inside gets rebuilt — foundation bolting, soft-story retrofit, repipe, rewire, HVAC, insulation, drywall, finishes. We run the architecture, the LADBS permit, and the construction under one contract.

The Valley is the most predictable corner of LA city for an ADU permit. Standard R1 lots, flat topography, and LADBS's online portal mean state ADU law applies cleanly with no neighbor notice and no discretionary review. The two variables are the Mulholland Scenic Parkway Specific Plan (south-side hillside parcels) and Very High Fire Hazard Severity Zones.

San Fernando Valley cost band — 2026

$450 – $850 / sqft installed

Structural retrofit needed, foundation work, finish level, and whether you keep or replace windows drive the band.

San Fernando Valley permit clock

610 weeks ministerial

Plan on 5–8 months for design + LADBS permit, then 8–14 months on-site for a 2,000–3,500 sqft house.

Scope — start to keys.

  • Soft-story / seismic retrofit, foundation bolting, cripple bracing
  • Full repipe (copper or PEX), full rewire, 200A panel
  • HVAC redesign, ducting, mini-splits where ducted is impossible
  • Insulation to current Title 24, exterior weatherization
  • Kitchen, all baths, floors, millwork, paint, landscape repair

What changes about the permit here.

  1. Ministerial review under LAMC §12.22-A,33 — no public hearing.
  2. Detached rear-yard ADUs fit standard 50×150 lots without variances.
  3. VHFHSZ parcels require Chapter 7A ignition-resistant exterior assemblies.
  4. Mulholland Specific Plan parcels need a separate Director's Determination before LADBS.

What moves the San Fernando Valley number.

  • Most predictable cost in our service area — flat lots, easy crane / concrete access.
  • Chapter 7A fire-rated assemblies add $18–35k in materials on VHFHSZ parcels.
  • Mulholland Specific Plan parcels add design + filing fees, not construction cost.
  • LADWP service drop runs $4–12k depending on existing main panel.

In short.

How much does a whole-home remodel cost in Los Angeles?
Whole-home down-to-studs remodels in LA typically run $450–$850/sqft installed. Foundation retrofit, full repipe/rewire, and finish level drive the band.
Do I need to move out during a whole-home remodel?
Usually yes — for a true down-to-studs project, the house is not livable for 6–10 months. Some lighter whole-home projects can be phased.
Should I do a seismic retrofit at the same time?
Yes — when the walls are open, the marginal cost of foundation bolting and cripple-wall bracing is small. Doing it later costs 3–5× more.
How big can my detached ADU be in the Valley?
State law guarantees up to 1,200 sqft on a single-family lot, regardless of local FAR limits. Most Valley lots can fit a 1,000–1,200 sqft 2BR detached unit.
Do I need a Mulholland Specific Plan review?
Only if your parcel is inside the Mulholland Scenic Parkway Specific Plan boundary — primarily the south-facing ridgeline of Sherman Oaks, Encino, and Tarzana. We check the parcel on the first walk.

More we build in San Fernando Valley.

Whole-Home Remodeling in nearby LA areas.

Got a San Fernando Valley project in mind?

Send us the address and we’ll pull San Fernando Valley zoning, setbacks, and whole-home remodeling feasibility before you spend on drawings.

Start a San Fernando Valley project →
Call